Speed.
hashrate
Pools and workers
Uptime
Power consumption
Monitoring is a compact device that connects to mining equipment and allows you to control the farm remotely.
Restart miners
Lets you
Shows
Change pools
Calculate mining farm profitability
Go to the web interface.
See how it works:
Antminer S21 Vnish
complex settings that can be difficult to understand
require a laptop or router
Shows metrics only on request
Cannot remotely control ASICs from a phone
Other systems
Monitoring
Connect Monitoring to your existing local network, then download the app.
No extra laptop or router is needed.
Tracks metrics automatically and sends notifications if something is wrong.
Full remote control of the device
How does monitoring differ from other systems?
➊ Plug in the power cable into a power outlet, then connect Monitoring to your existing local network
➌ Create an account, then enter the code from the device and add your ASIC miners to Monitoring
➍ Done! Monitoring tracks the work of miners, and you can manage your devices from anywhere in the world!
➋ Download the app from the download page
Setting up Monitoring is easy!
You don’t want to deal with technical settings.
If you:
Do not want to buy a laptop to configure or control your mining equipment
Travel frequently and cannot carry a laptop.
Monitoring is for you!
Connect Monitoring and manage your mining equipment from your phone.
—
—
—
Frequently asked questions
No. Monitoring receives data from the miner interface and sends it to the app. It does not replace the miner’s firmware and therefore cannot affect the mining process.
Open the app and tap “Explore demo” on the sign-in screen.
Monitoring is a compact device that connects to mining equipment and lets you monitor and manage ASIC miners remotely through the app.
- Profitability
- hashrate
- Power consumption
- Uptime
- Average temperature from all boards
- Error codes
- Allows you to open the ASIC control panel
- Lets you view and remotely configure pools and workers
- Reboot devices
- Change the work schedule.
- Sends a push notification when a miner goes offline and identifies it.
These readings show the miner’s actual condition and can help you act early, saving time and money. In many cases, you can diagnose an issue remotely instead of visiting the miner. For example:
Higher fan speeds may indicate that a miner is overheating; you may need to change its operating mode or conditions.
A drop in hashrate may indicate a faulty board.
A fan stopping may indicate a malfunction. You can then decide whether to address the issue on site or take the miner to a service center.
Higher fan speeds may indicate that a miner is overheating; you may need to change its operating mode or conditions.
A drop in hashrate may indicate a faulty board.
A fan stopping may indicate a malfunction. You can then decide whether to address the issue on site or take the miner to a service center.
- Power Monitoring with the included adapter, then connect it to the existing router on your mining network. The device will not activate without a network connection.
- Choose the right app version on the download page.
- Enter the phone number that will receive a one-time verification code by SMS. Use this number to sign in.
- Enter the unique code shown on the device.
- ASIC miners will appear automatically within a few minutes.
The retail price of the set is 1900 rubles.
It includes:
It includes:
- Monitoring device
- Power adapter for a 220 V outlet
You can connect up to 250 devices.
Each Monitoring device can be linked to only one account. You can use the same account (phone number) on multiple phones. To do this, sign in on each phone using the account phone number, then enter the one-time code sent by SMS to that number. The account will then be available on those phones. Important: push notifications about miners going offline are sent only to the phone that signed in most recently. Notifications for all connected users will be added in the future.
Control permissions and selective monitoring (showing selected devices to selected users) are not available yet.
Control permissions and selective monitoring (showing selected devices to selected users) are not available yet.
Yes, if you can receive SMS codes for each account. To switch accounts, sign out of the active account and sign in to the other one each time. Push notifications are sent only for the active account.
Most ASIC models from popular brands are supported.
Here is a list of the main ones:
Here is a list of the main ones:
- Whatsminer
- Bitmain
- Canaan
- Innosilicon
- Iceriver
Monitoring supports miners running original or alternative firmware.
The device has a one-year warranty. If it malfunctions, we replace it with a new one.
Unlike alternative firmware, Monitoring does not charge a hidden DEV fee. Alternative firmware is often designed to overclock ASICs, which can affect the service life of chips and other components.
The app displays the average temperature across all boards.
- Multiple farms in one app
- Total yield and today’s return
- Total hashrate and power consumption
- Number of miners and farm list
- Number of devices on each farm
- Account
- Add farms
- Sign out
- ASIC model
- IP address
- Power consumption
- MHS (average hashrate over 5 minutes)
- HS (average hashrate over 15 minutes)
- temperature
- Fan speed
- Uptime
- ASIC miner control panel
- Pools and pool selection
- Operating mode and selection
- Error codes
- Reboot
- Email address and option to change it
- phone number
- Connected Monitoring devices
- Push-notification toggle
- Account deletion
Notifications when a miner comes online or goes offline (may take up to 2 minutes)
News and updates are posted on this website.
Support: 8 (800) 500 86 04.
